Creating an Alignment with the Alignment Layout Tools
Specify alignment properties
- Open Align-1.dwg, which is located in the tutorials drawings folder.The drawing contains a surface marked with several circles, labeled A through D.Note:
Ensure that Object Snap (OSNAP) is turned on. - Click tab panel drop-down .
- In the Create Alignment – Layout dialog box, for Name, enter First Street.
- On the General tab, select the following settings:
- Site: <None>
- Alignment Style: Layout
- Alignment Layer: C-ROAD
- Alignment Label Set: Major Minor and Geometry Points
Setting the site to <None> prevents the alignment from interacting with other objects in the drawing. The <None> selection is helpful when you do not want parcels to be created when either intersecting alignments form closed regions or an alignment crosses an existing parcel. - Click the Design Criteria tab.The Starting Design Speed value specifies the default design speed at the alignment starting station. Design speeds can be specified at other stations along the alignment. If no other design speeds are specified, the Starting Design Speed is applied to the entire alignment. Accept the default Starting Design Speed value for this exercise.The other options on this tab are used only if you want to ensure that the alignment design meets specified design criteria. You do not apply design criteria to the alignment in this exercise. You will learn how to use the design criteria feature in the Designing an Alignment that Refers to Local Standards tutorial.
- Click OK.The Alignment Layout Tools toolbar is displayed. It includes the controls required to create and edit alignments.
Draw the alignment
- In the Alignment Layout Tools toolbar, click the drop-down list and select Curve and Spiral Settings. In the Curve and Spiral Settings dialog box, you can specify the type of curve to be automatically placed at every point of intersection (PI) between tangents.
- In the Curve and Spiral Settings dialog box, specify the following parameters:
- Type: Clothoid
- Spiral In: Cleared
- Curve: Selected
- Spiral Out: Cleared
- Default Radius: 350.0000’
- Click OK.
- On the Alignment Layout Tools toolbar, click the drop-down list . Select Tangent-Tangent (With Curves).
- Snap to the center of circle A to specify a start point for the alignment.
- Stretch a line out, and specify additional PIs by snapping to the center of circles B, C, and D (in order). Then, right-click to end the horizontal alignment layout command.
- Pan and zoom in the drawing to examine the style and content of the labels. Note especially the geometry point labels marking the start and end points of each line, spiral, and curve.
creating an alignment with the alignment layout tools |
autocad civil 3d |
civil 3d |
civil 3d tutorial |
autodesk civil 3d |
road design |
autocad 3d tutorial |
autocad civil 3d tutorial |
civil 3d alignment |
autocad tutorial pdf |
civil 3d superelevation |
autocad align |
autocad civil 3d alignment |
civil 3d profile |
autocad civil |
autocad manual |
autocad 3d drawing |
autocad 2016 tutorial pdf |
road profile design autocad |
create alignment civil 3d |
alignment civil 3d |
autocad civil 3d 2015 |
create profile civil 3d |
civil 3d software |
autocad civil 3d training manual pdf |
reverse alignment civil 3d |
align autocad |
civil 3d assembly |
offset profile civil 3d |
learn autocad pdf |
civil 3d profile view |
civil 3d road design |
centerline alignment |
autocad civil 3d free download |
civil autocad |
civil 3d offset profile |
autocad civil 3d 2016 tutorial pdf |
autocad civil 3d profile |
civil 3d book |
profile civil 3d |
autocad 3d civil |
profile view civil 3d |
creating corridors in civil 3d |
autocad 2015 tutorial pdf |
autocad civil 3d download |
civil 3d create alignment from polyline |
autocad tutorial 3d |
3d in autocad |
autocad 3d tutorial pdf |
civil 3d create alignment |
3d drawing in autocad |
autocad training manual free pdf download |
autocad 3d commands pdf |
autocad civil 3d tutorial pdf |
autocad 3d download |
autodesk autocad civil 3d |
civil 3d corridor |
alignment labels civil 3d |
civil 3d pipe network profile |
3d autocad tutorial |
civil 3d grading |
civil 3d points |
cad civil 3d |
civil 3d vertical alignment |
civil 3d download |
autocad 3d commands with examples pdf |
autocad 3d pdf |
autocad pdf books |
autocad civil 3d 2016 download |
superelevation in civil 3d |
road alignment |
autocad manual pdf free download |
civil 3d styles |
autocad commands with examples pdf free download |
civil 3d grading tutorial |
road design civil 3d |
3d civil |
autocad elevation |
corridor civil 3d |
civil 3d tutorial pdf |
autocad civil 3d 2015 tutorial pdf |
autocad 3d |
autocad 2013 tutorial pdf |
how to draw 3d in autocad |
autocad civil 3d 2015 download |
creating cross sections in civil 3d |
create assembly civil 3d |
autocad 2015 3d tutorial pdf |
autocad 3d exercises pdf |
3d road |
civil 3d manual |
autocad civil 3d manual pdf free download |
autocad 2007 tutorial pdf |
autocad surface |
civil 3d 2017 new features |
autodesk civil 3d 2015 |
autocad civil 3d 2013 |
autocad 2015 tutorial for beginners pdf |
autocad civil 3d free download full version |
assembly civil 3d |
1 Comments:
Useful info
Post a Comment
Subscribe to Post Comments [Atom]
<< Home