How To Add Baselines to a Corridor in AutoCad Civil 3D
To add baselines using the ribbon
- In the drawing, click the corridor.
- Click Find.
- In the Create Corridor Baseline dialog box, specify a baseline name.
- Specify the baseline type:
- Alignment and Profile: Specifies that the baseline will be comprised of an alignment and profile, and displays the Horizontal Alignment list so you can select the alignment.
- Horizontal Alignment
- Lists the horizontal alignments that are available. Click to select an alignment in the drawing.
- Feature Line: Specifies that the baseline will be comprised of a feature line, and displays the Site and Feature Line lists so you can select the feature line.
- Site
- Lists the sites that are available. Select a site from the drop-down list or click to select an object in the site in the drawing, which selects the site and filters the list of feature lines.Note: Leave this as <None> to list the feature lines that are not stored in a site.
- Feature Line
- Lists the named feature lines that are available in the specified site or that are outside of a site. Select a feature line name from the drop-down list or from the drawing. If you select the feature line from the drawing without first selecting a site, the site will also be selected.Tip: If a feature line is not named, it will not appear in the drop-down list. You can click to select a feature line (named or unnamed) in the drawing. If the selected feature line is not named, the Apply Feature Line Names dialog box is displayed so you can enter a name for it.You can select feature lines that have been created using the feature line creation tools, including dynamic or static feature lines that have been extracted from a corridor.Tip: Feature lines that have been extracted from a corridor and are either dynamic or static to that corridor can be selected for use as a baseline in the same corridor. For more information, see About Using Multiple Dynamic Baselines in a Corridor.
- Alignment and Profile: Specifies that the baseline will be comprised of an alignment and profile, and displays the Horizontal Alignment list so you can select the alignment.
- Click OK.
To add baselines using the Corridor Properties dialog box
- In the drawing, click the corridor, then right-click and click .
- In the Corridor Properties dialog box, click the Parameters tab.
- To add a new baseline, click Add Baseline.
- In the Create Corridor Baseline dialog box, specify a baseline name.
- Specify the baseline type and object to use for the baseline.
- Click OK.
- To add a region to the baseline, right-click the baseline. Click .
- Click Apply.
0 Comments:
Post a Comment
Subscribe to Post Comments [Atom]
<< Home